Get started
You can be on the air in an afternoon for about $30 to $40. You do not need a license or any radio experience.
What you need
- A node. See our Hardware Guide for exactly what to buy.
- A phone or tablet with Bluetooth. It does not need cell service.
- The free Meshtastic app from the App Store or Google Play.
- Internet for setup only. Once the node is set up, it never needs the internet again.
Set up your node
- Attach the antenna first. Never power a node without its antenna. It can damage the radio.
- Install the Meshtastic app on your phone.
- Load the software if your board came blank. Open the Meshtastic Web Flasher in Chrome or Edge on a computer, plug the board in with a USB cable, choose your board, and install the latest stable version. Boards sold as "pre-flashed" skip this step.
- Power it on with USB or its battery.
- Pair it. Open the app, tap your node in the Bluetooth list, and enter the PIN shown on the node's screen. If your node has no screen, the PIN is 123456.
- Set the region to US. The node will not transmit until you do.
- Give it a name. Pick something friendly and a four-character short name. Don't use your full name or address.
- Leave everything else alone. Our settings page lists the few things that matter.
- Say hello. Send one short message on the main channel and see who answers.
Get more range
- Put the node high and near a window, or better, outside.
- Height beats everything. An upstairs window beats a bigger antenna downstairs.
- Hills block the signal. If you live in a hollow, you may need a neighbor's node on higher ground to relay for you. That is exactly what the group is for.
Nobody answering?
That's normal while the network is young. Join us so we know you're out there, and we'll help get a node in range of you.